Having information on photoshop can come in handy...

Want to get rid of that nasty shine that you get taking pictures? Well now you can, follow these easy steps: Let's start with a great, overlooked trick. After opening the image, open the same image again in a new window. In Photoshop, choose Window ->Arrange -> New Window. In Elements choose View->New Window. This allows you to view one window zoomed in for detail work and the other window at 100% so you can judge the effects. Using the magnifying glass tool draw a box around the area of shine. Make the box big enough to also show a fair amount of un-shiny skin. Select the Clone tool. At the top of the page select Mode: Darken and use the slider to set Opacity at 50%.Using the Clone Tool, select an area of un-shiny skin by putting the circle over the area and holding down the Alt button while left-clicking the mouse. To best match skin tone try to select the area of skin closest to the shine. Quick tip, to easily resize the Clone Tool circle simply use the bracket keys, [ and ] - much easier than moving your cursor back and forth between the photo and the Size slider. Now simply click on the shiny area and watch the magic happen. You'll have to experiment a little for best effect, and for larger areas be sure to resample the un-shiny skin frequently. In the zoomed-in image the effect might look too obvious, so you'll need to keep an eye on the 100% image to track your progress. Notice the difference on the tip of the nose, the cheek, and above his eye.

For those who do not know, Adobe Photoshop is a program designed to let people edit various images on their computers. Its primary purpose is to let people perform touch ups on pictures before printing them. Of course, each succeeding version of Adobe Photoshop included more and more tools which let people add effects and do various other things to their photographs. The Adobe Photoshop of today actually allows people to add sound and animation to their photographs for sharing on the internet. In the past, people who took bad pictures were stuck with them. A lot of things can go wrong in a picture. There's the usual red-eye, skewed angles, shaky focus and others. Adobe Photoshop was the tool that made all of these things disappear. With Adobe Photoshop, people can take pictures like amateurs and still produce images like pros! However, like almost any other person who has been held back by the fear that the Photoshop CS might be too sophisticated and complicated to be learned, there is a need to first familiarize with the basic and the advanced functions of the software. Even Adobe Systems recognize the fact that its Photoshop CS offering is challenging to use. Do not fret. There are now numerous ways on how you could easily and conveniently get a tutorial for the software. You would logically not be able to learn how to use the computer program for yourself. However, there are many centers and firms that aim to provide crash courses and lessons for the initiative.

News photographers routinely process images using Adobe Photoshop software. But there has been a basic premise in the world of photojournalism that what was allowed in making prints in the pre-digital days of darkrooms is all that is acceptable today. Back in the days of the darkroom, we used very basic tools to develop prints. In black and white printing, the contrast of a picture was controlled by a paper's grade. The higher the number of the paper, the higher the contrast. In the wire agency darkooms I've worked in, we typically used grades 3,4 and 5. We allowed "dodge and burn" to lighten or darken areas. A dodge tool was made by taping a small piece of cardboard the size of a quarter onto a paper clip. A burn tool was a piece of cardboard the size of an 810 sheet of paper with a hole in the center.

The burn, and sponge tools are hidden under the dodge tool in the toolbox. If one of these was used last, it will be on top, and the dodge tool will be hidden. To find it, click on the tool which is showing, and choose the one you want from the pop-up menu. The dodge tool will lighten the pixels dragged over according to the percentage chosen in the tool's options bar [see below]. You can choose to lighten highlights, midtones, or shadows. Each must be worked on separately; the tool does not work on all three at once.

Occasionally you have a photo with something that you don't really want in it. Well now you can remove it with the spot healing tool. This tool will allow you to easily remove unwanted objects inside your photo. With the spot healing tool, you simply click on or drag across the flaw you want to remove and it disappears. The retouched area is blended into the surroundings seamlessly - most of the time anyway. It takes a little practice getting a feel for how brush size and healing work together, but most of the time it does an impressive job.

The Dodge tool can also be used to whiten the whites of the eyes, and, in general for anything you want to lighten. Used with discretion, it's quite a handy tool. In Photoshop, there are always a number of methods to accomplish the same thing. Another way to whiten teeth would be the following: Select the teet with your Lasso tool icon, (second down on the left in your Tools). Then click on Image in your Menu, Adjustments, and Curves. Make sure the Channel box says RGB. Then, with your mouse, pick up the top right-hand corner of the box and drag the line over to the left. You will be able to watch the whitening process as you go. You can use the Curves tool to change color on any given selection, too.

Tons of people are using photoshop, but what aren't they using it for and should? Restoring Old Photographs. Have a look through that old family photo album - the really old one from up in Grandma's attic. Inside there are probably a few photos from way back when that haven't stood the test of time so well. They've got cracks and tears that really spoil their appearance. Scan them into Photoshop, and then set to work with the Clone Stamp, Healing Brush, and Patch tools. The Healing Brush in particular is a great tool for this purpose as it samples data from one part of the picture and blends it in with what's already there. Correcting Mistakes. We've all done it: Had an attack of "finger over the lens syndrome," or got too close with the flash, so our subjects suffer from "red eye" and look like extras from a horror movie. Use the crop tool to salvage something usable from your obscured photo, and the enlarge wizard to blow it up to a reasonable size. For "red eye" and "pet eye," use the eyedropper tool to sample color from around the iris, and a brush to paint away the red.

Article Source: Free Articles - http://www.articlesworldonline.com

Some great information that will aid you to learn photoshop quickly. Edit some masterpieces using the dodge tool to edit and fix your pictures.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated